Wednesday, September 19, 2012

The Rake on the Asola Lucida

rake_article_cover

Shameless plug.

This month's issue of The Rake has an article I wrote on the "Boutonnière Milanaise", or the Asola Lucida.

Just a heads-up for those among us who can't get enough buttonhole porn.

StumbleUpon.com

Monday, September 17, 2012

Indochino- How did my garment turn out?

pant10

OK let’s get to it. This is going to be a long one. And while most of this is specific to my experience with Indochino, a lot of the pointers could apply to any kind of MTM experience so may be worth a read to anybody who is thinking about getting a suit made. I’ll address some of the construction details in another post.

There have been a number of questions and comments here and elsewhere that I will try to address, but if I miss something, please let me know in the comments section.

First, I want to address expectations. Several people have said that they like what I make for myself better. Well, duh. If what I make for myself is not a million times better than an inexpensive MTM garment I should immediately quit what I am doing and become an accountant instead. You can’t compare a hand-made bespoke garment with MTM.

Which brings up another point.

If you have spent any amount of time browsing the online clothing fora, you should probably know by now that even bespoke clothing, being the result of expert craftsmanship and several fittings, which by all accounts should be the pinnacle of perfection in fit, is still subject to imperfections. I can count on one hand the number of online posters who own what I consider to be impeccably-fitting garments, and 99 times out of 100 (or more) they are the result of an ongoing collaboration between client and cutter. The first attempt is almost never even close to perfect- any true customer of bespoke clothing will tell you this. So I think people need to moderate their expectations when it comes to made-to-measure clothing, especially in the first attempt, and most particularly with less conventional formats such as this one. This is not to excuse egregious errors which may occur, but to put a little perspective on things.

Generally, however, people seem to agree that Indochino did pretty well on this suit, compared to some of the other examples floating around the internet, and questions have arisen to why this may be. I certainly didn’t give them much guidance. So what made the difference?

Well, first off, I am not a believer in making clothing from measurements alone. Three people with the exact same chest circumference can be shaped completely differently- the very erect guy with flat back and prominent chest, the stooped old man with a dowager’s hump and flat chest, and your average Joe. How on earth is a chest circumference supposed to capture this? Then there is the matter of personal preference. To the client’s skin measurement we always add what is known as “wearing ease”. This is not a compression tshirt, it is a suit- it must be bigger than your own measurement to some degree. And it is the degree which trips people up. Standard ease would be between four and six inches more than the body measurement- for example, if your chest measures 40”, the coat chest should generally be between 44” and 46”, depending on how you like to wear your clothes. One guy will find 4” too big, however, and the next will find it much too tight. How do you account for this?

TRY-ON GARMENTS.

When I was fitted, my measurements indicated two possible sizes to try on. I tried on three. This is probably the most important part of any MTM process- find the garment that is closest to a good fit, especially in the shoulders, and work from there.

And this, kids, is the moment where you need to step up and pay attention. This is the point where you need to communicate to your fitter if the length, the button stance, the general fullness, everything is right for you. If not, now is your chance to say so; your fitter is not a mind-reader. Is the sleeve a bit too snug? Is it perfect? Is it too big? Say so now. Have the fitter explain exactly what changes they intend to make to the garment you currently have on. They may think the waist needs to be cinched a bit, but you feel that it’s fine. Say so.

That being said, how does one manage when one does not have access to a trunk show and you have no option other than to submit measurements online? The remake policy is probably the best (only?) way around this. Self-measuring is a crap-shoot at best, but with a good alterations and remake policy it takes much of the risk out. My one caveat is that customers should not try to micro-manage the remakes. A lot of what I see going on online makes me cringe, when the customer tries to get too specific or too technical. Send them pictures and explain generally what you don’t like- “the shoulders are too wide”, for example. What you interpret to be too much padding may have nothing at all to do with padding so if you ask them to remove padding with the expectation that the expression will change, you will fail. If, given your general description of the issues and some good photos (dump the iPhone, please) the technicians at the factory can’t figure out what needs to be done from that, then you telling them to “reshape the sleeve head and crown to fit the armhole” is certainly not going to get you anything except possibly frustrated, especially since the Chinese-speaking technicians may have no idea what the internet-fueled jargon you may be using actually means. Unless you are a trained garment technician, or you play one on the internet, do not try to get overly technical.



Another element which may have contributed to the success of my garment was that I had one of their in-house fitters who flew in from Vancouver- many of the others are hired temps which get a few hours of training in fitting. Some have more experience than others, which may suit the general population who doesn’t know better, but if you are reading this blog then you are probably more attuned to fit and should be working with one of their more experienced people. I found my fitter’s story compelling- he was initially a customer of Indochino who was so impressed by the experience that he went to work for them. That says a lot about his level of enthusiasm and interest which probably went a long way toward making my garment a success.

I also think that the majority of what we see posted on StyleForum is not representative of the real world. I think many of the posters can be fit into one of three categories;

1) Look on my new bespoke Rubinacci, ye small-timers, and despair!
2) ZOMG look at the new Kiton jacket I just scored on ebay!!1!!
3) I just got a new suit in the mail and I don’t think it fits but I can’t articulate why

It’s very likely that Indochino has a lot of satisfied customers who can’t be bothered to post photos of themselves on the internet, I and if the success rate of a company could be judged based solely on what we see posted on the clothing fora, Anderson and Sheppard would have gone out of business a very long time ago.

Now on to the nitty-gritty.

The shirt is not bad for a first attempt, but considering their emphasis on fitted clothing, I find the back especially blousy. Darts would go a long way to contouring the fit and should probably be added as a matter of course (Heikal, are you reading this?). The collar and sleeve length are correct, and those are probably the most critical points.

shirt03

My only gripe about the styling of the trouser is that I would prefer a narrower bottom with such a narrow knee- this borders on looking flared, and I would also shorten a trouser this narrow- there should really be almost no break at all, if any. It’s pretty typical that the back hits the calf when you taper so aggressively to the knee, though in general they could pick this up a bit. The fit of the seat is very good, though I gave them some help. I have what we call a “prominent seat”; the default for most trousers is to have one dart above each pocket and there is no way that a trouser will fit my seat with only one- two are required. They add a second in certain instances (it was not entirely clear when- it seemed like only the large sizes got them) but I insisted that a second would be necessary in my case. They said they would try, and they did. The pockets sit flat and do not gape; there is a bit of pulling in the thigh but that is pretty typical of a trouser that is so close-fitting in the thigh. Customers are advised to pay particular attention to the fit of the trouser during the fitting as they are quite slim.

pant06


The vest seems blocky, but I haven’t cinched the belt, which would help. I did it on purpose because the majority of vests on the market have loose, blousy backs which really need to be cinched a lot, and I hate that. The back of this vest is actually very well done, quibbles about the position of the neckline aside; it could also be a bit closer to the body, but then I would not have room to eat. If it were a bit longer and the points more elongated than horizontal, it would look a lot slimmer than it currently does, but would be too long in proportion to the jacket. I may ask Foo to work his magic on the picture so you can see what I mean. But in general, a better –than-average fit.

vest11

Several people have commented about the length of the jacket being too short, stance too high and lapels too narrow. Were this a classically-styled garment they would have a point, but this is not. It’s a fashion-forward garment. I tried on some Isaia DBs in Milan and the hem of the jacket was about even with the hem of the sleeve, so if one is to judge by what’s going on in the market, it’s maybe even a tiny bit too long. I think that’s getting into dangerous territory for a DB and think that the details of this garment, for what they are trying to achieve, are actually correct.

The fit of the shoulders is good, however I don’t think that they are set up to capture low shoulders- in any case, they seemed to have missed mine. I would have sloped them a bit more as well. Other than that, the fit of the front is quite good, and I like the sleeve length.

jacket12

The back is pretty good, with two exceptions. They need to work on their sleeve pattern (to be fair, the back of the sleeve is the Achilles heel for most clothing pattern designers) and the seat of the coat is much too small, causing the vents to gape badly. This also seems to be a recurring theme so they may want to look at their base patterns.

jacket13

jacket14

On the subject of sleeves, they didn’t match the plaid on the front. This is a must, in my books, though certain Savile Row cutters wouldn’t agree- I have seen a lot of SR garments which weren’t matched either. I’d be willing to give them a freebie lesson on matching plaids if this is anything other than a mistake on their part (Heikal?).

So on the whole, I consider this experiment fairly successful; other people have had different results, though. If you’re in the San Francisco area and want to have a look, or even try it out for yourself, the Traveling Tailor is there this week, from the 18th to the 23rd. It’s worth a look just to see their setup. You can book an appointment here.

StumbleUpon.com

Saturday, September 15, 2012

Indochino- first impressions

The suit and shirt came earlier than promised but I was busy so I let it hang for a few days. Since I know how to press a suit, it was conceivable that I might have improved it a bit by giving it a good press so I shot it as it came out of the box. If I have time, I'll give it a press and reshoot, to see if that makes much of a difference in the fit.

I'll get into more detail about it early next week, but here are some first impressions. On the whole, I'm pleasantly surprised for the most part.

During the fitting process I let them do their thing. I wanted to get the "Indochino experience" so I didn't guide them, with one exception. Readers will have to keep something in mind; when you go to Indochino you are getting a skinny, fashion-forward suit like you might find on the pages of GQ or Details. This is not bargain-basement Brioni, and if you are looking for classic proportions according to "whnay's good taste" thread then you are looking in the wrong place. However I think it is good to have a point of view and to be very direct about it; there is too much half-baked clothing on the market which tries to be everything to everybody and thus fails in most things.

StumbleUpon.com

Thursday, September 13, 2012

Eating Out

LODO04

I was shopping one day with a friend who had come in from Milan for a visit. He is also in the trade so we enjoy "doing the stores" together, to check out what everybody else is doing. We stopped into L'Uomo, in Montreal, which Alan Flusser called Canada's finest menswear store. The salespeople there love their product, are incredibly knowledgeable about it, and love to talk about it, especially with those who exhibit an appreciation for what they are selling.

That day they had me try on a sportcoat. A Very. Expensive. Sportcoat. The fit was absolutely spot on, the construction was immaculate, and some of the details kind of fascinating. I was a little bit in love. Okay, maybe a lot.

"Buy it", my friend said.

"You are out of your mind", I replied. "This thing costs a bloody fortune and I could make it myself. I can't spend this kind of money on something I could make myself!"

"Bello," he sighed impatiently, "do you think Jamie Oliver never eats out? And when he does, do you think he eats at McDonald's? Buy the damn thing."

Check, and mate.

I couldn't think of an argument. So I bought it. And he was right, in a way; sometimes it's good to try out what other people are doing because it makes you think of things you wouldn't have thought of otherwise. I learned a lot from that coat so I wrote the expense off, in my own mind, to my own education.

Fast forward a few years.

When I was in Spain, this spring, I got to chatting with the designer from Boglioli. He really liked a jacket I was wearing, the one I had made from the Ariston cloth that I bought from Kemp and Hewitt. He especially liked the way I got my collar to fit so we chatted a bit about it. He was making a technical presentation and had some garments with him so I tried some of them on. They are fantastic garments- really soft and lightweight, they feel like you have nothing on. A bit like Kiton, but whereas Kiton looks like a rumpled mess, these actually looked pretty clean. They do a huge amount of research and testing on treatments like washes and proprietary finishes so their garment is pretty unique on the market, but very expensive, due to all the testing. I complimented him on the garments and made some offhand remark about buying one if I had several thousand dollars I didn't know what to do with. Ha.

A few months ago he got in touch with me to let me know that he would be visiting New York in September, and that it would be great if we could get together. We exchanged a few details, then he came up with an idea. Knowing I loved their product, he offered to make me one of their coats in exchange for one like the one I was wearing in Spain. We could meet in New York and exchange garments. I thought this was a great idea. We'll get a chance to turn them inside out and talk about how we did them. I love this kind of exchange, both of ideas and of garments.

So I ordered some more cloth and am making him a sportcoat. I can't wait to see how mine turned out- I will no doubt be posting some photos when I get it.

StumbleUpon.com

Thursday, September 6, 2012

Indochino- a box came

icDATE

They promised delivery for September the 8th- it actually arrived September the 4th.

Anyone who has had items shipped from abroad knows about nasty surprise brokerage fees and duties and stuff. There's none of that- they deliver the box and that's it.

So far, so good.

I'm going out of town for the weekend so I don't know if I'll be able to shoot anything useful before then, but I will try. Meanwhile, if Brad is still reading, if you got your suit, please get in touch with me- I'd like to know how yours turned out as well.

StumbleUpon.com

Wednesday, September 5, 2012

What's a $4,000 suit worth?

I am occasionally contacted about my services as a bespoke tailor and I have to try to explain that, while it is something I very much enjoy doing, I only do it for the fun of it, and not as a business. Why? You just can't make decent money doing it.


The NY times ran a short piece about tailoring and economies of scale.


Which is a better explanation of why the RTW industry is my bread and butter, and why the only time I take on a new commission is because there's something I really want to make- purely for the pleasure of doing it, and not for the money.

StumbleUpon.com